Button Setup in SS NextGeneration
Date:
May 9, 2023
Categories:
For existing applications , caming from FIM Supersport 600 , often there is an issue related to button setup .
The Next Generation rules are moving on a direction to unify some parts , including left hand buttons . This is to have unified system to navigate through the DashBoard for the technical check .So this FAQ is not intended to allow to brake the rules but only to solve a TEMPORARY problem.
Of course there are many devices installed that could be replaced during this transition , but need to be used in the meanwhile .
Here below We show a simple procedure that , in few steps , can be used to import Your previous existing configration .
Prerequisites :
- You should have MECAL 3.0 installed ( SMALL version3.0.1.52or more recent )
- Workspace forFIM Suspersport 600, and Database with Your past Years maps
- Workspace forSupersport Next Generation
For Your convenience , here We supply that DSS file ( Data SubSet ) with configurations for SoloEngineering 4 buttons , and Mectronik 5 Buttons .
DSS for Buttons SetupVersion 1.1 - 5 kb 1448 downloads
Configurations for the Mectronik 5 Buttons unit and the SoloEngineering 4 Buttons...Anf the Configurations for World Supersport 300 Applications :
Supersport 300 Buttons SetupVersion 1.0 - 300 kb 252 downloads
Application note that describe how to import the buttons setup for Supersport 300...DataSheet for Left Side Mectronik 5 buttons :
Left Side 5 Buttons CommandsVersion 1.0 - 0.5 Mb 414 downloads
Datasheet for Rider Buttons Left Side , command with 5 buttons ...Using the configurations here above , You can skip directly to STEP 10 .
1) Select the Workspace FIM Supersport 600
2) Open last version 1.20
3) Open a MAP with button setting You would like to use
4) Open the page with the Button Setting
5) From menu FILE , select DATA SUBSET EXPORT
6) Select all parametrer in list
7) Optionally , give a Name and add a Description to Your Data Subset
8) Switch to Supersport Next Generation Workspace
9) Open a MAP , a base or an existing map You already modified and used
10) From menu FILE , select DATA SUBSET IMPORT
11) Browse on Your disk , and open the file You saved just after point 7
12) Now Your MAP , for Supersport Next Generation , contains Your custom settings compatible with Your Buttons device . You can apply points 10-11-12 for all maps You need to use .
